Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】

  • A+
所属分类:Coinbase(BASE)

chatGPT账号

Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】

一、准备:
1、使用在线的remix IDE或者搭建本地remixIDE都可以,优先选择在线的ide,中小项目足够了,但是在线remix的编译器版本加载有些慢,必要时需要KXSW
2、metamask钱包配置连接base主网,钱包中要有ETH,发币时消耗的ETH,这点区别于波场发币,波场消耗的是带宽和能量
metamask要充值足够的ETH否则合约发行失败,还会消耗掉你的ETH
3、合约接口要实现ERC20标准
4、部署合约时,要选择inject web3,连接上metamask钱包的用户来部署合约。
二、注意事项
1、发币完成后要记录交易的hash id,通过basescan浏览器查询合约是否部署成功,并且获得发布的token的合约地址
2、base上发布合约后,暂时没有渠道可以上传通证logo,这点不如波场,在波场上可以自由上传更新logo
3、发币时建议首先在base的测试网上发布下合约,在钱包中转账,测试下是否满足合约中设定的模式。没有问题后再在base主网上发币。
三、具体发币步骤
1、打开remix在线IDE或者本地IDE环境
官网remix网址:https://remix.ethereum.org/,本示例使用的是本地remixIDE环境
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
2、创建合约文件
如果有多个文件,项目比较复杂的话,可以在根目录下创建文件夹,每发行一个代币保存到一个文件夹中,这样便于管理。
本示例以标准代币发行为例演示发币过程
在ARBI文件夹下创建七个sol文件:分别为IERC20.sol,SafeMath.sol,ERC20Detailed.sol,ERC20.sol,Context.sol,Ownable.sol,Tokenl.sol
对应的文件代码如下:
IERC20.sol文件:  
pragma solidity ^0.5.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP. Does not include
 * the optional functions; to access them see {ERC20Detailed}.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

SafeMath.sol文件:

pragma solidity ^0.5.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}

ERC20Detailed.sol 文件:

pragma solidity ^0.5.0;

import "./IERC20.sol";

/**
 * @dev Optional functions from the ERC20 standard.
 */
contract ERC20Detailed is IERC20 {
    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for `name`, `symbol`, and `decimals`. All three of
     * these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol, uint8 decimals) public {
        _name = name;
        _symbol = symbol;
        _decimals = decimals;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
}


ERC20.sol 文件:

pragma solidity ^0.5.0;

import "./IERC20.sol";
import "./SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20Mintable}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public returns (bool) {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `value`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _balances[sender] = _balances[sender].sub(amount);
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "ERC20: mint to the zero address");

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

     /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0), "ERC20: burn from the zero address");

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    /**
     * @dev Destoys `amount` tokens from `account`.`amount` is then deducted
     * from the caller's allowance.
     *
     * See {_burn} and {_approve}.
     */
    function _burnFrom(address account, uint256 amount) internal {
        _burn(account, amount);
        _approve(account, msg.sender, _allowances[account][msg.sender].sub(amount));
    }
}

Context.sol 文件:

// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
pragma experimental ABIEncoderV2;

abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

Ownable.sol 文件:

// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;

import "./Context.sol";

contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

Token.sol 文件:

// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;

import "./ERC20.sol";
import "./ERC20Detailed.sol";
import "./Ownable.sol";
import "./SafeMath.sol";

/**
 * @title SimpleToken
 * @dev Very simple ERC20 Token example, where all tokens are pre-assigned to the creator.
 * Note they can later distribute these tokens as they wish using `transfer` and other
 * `ERC20` functions.
 */
contract Token is ERC20, ERC20Detailed, Ownable {

    /**
     * @dev Constructor that gives msg.sender all of existing tokens.
     */
    constructor(string memory _name, string memory _symbol, uint8 _decimals, uint _total) public ERC20Detailed(_name, _symbol, _decimals) {
        _mint(msg.sender, _total * (10 ** uint256(decimals())));
    }
}

以上文件创建完成后保存会自动编译。
编译器版本选择0.6.12
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
3、部署合约
所有合约文件编译通过后,就可以部署合约了。
remix IDE支持以太坊,ARBI,BSC,HECO,BASE链上部署合约,代码在所有链上完全一致,不需要任何针对平台的调整。
决定合约部署到哪个公链上,取决于metamask钱包当前连接到哪个公链上。
比如本示例想部署到BASE公链上,此时metamask就必须连接BASE主网:
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
然后在remix IDE上部署已经编译成功的合约:
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
合约部署时推荐的gas费用较高,需要调整gas费用,选择”较低“ 或者”市场“
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
4、合约部署完成后,在BASE区块链浏览器上查询hash id,确认合约是否部署成功。
点击transact执行合约部署后,在remix控制台输出如下:
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
其中最重要的信息是 transaction hash值,记录该值,到区块链浏览器(https://basescan.org/)上查询该值。
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
区块链浏览器显示该transcation hash对应的交易执行成功,合约成功部署,对应的合约地址为以上截图信息。
5、metamask钱包添加发行的代币
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
注:以上截图是在arbitrum链上添加代币时的操作,在base链上操作时需要切换网络到base主网上。
metamask钱包发币账户成功添加刚刚发行的代币,至此BASE主网发币完成。
区别于波场发币,波场发币完成后需要在tronscan上录入通证,同时上传logo。但是BASE链上不允许自定义logo,logo都是发币完成后自动生成的。
至此,remix+metamask实现BASE链上发币完成。

pdf+视频Coinbase base链发币教程及多模式组合合约源代码下载:

Coinbase base链发币(合约部署、开源、锁仓、LP、参数配置、开发、故障处理、工具使用)教程下载:

Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】

多模式(燃烧、回流指定营销地址、分红本币及任意币种,邀请推广八代收益,LP加池分红、交易分红、复利分红、NFT分红、自动筑池、动态手续费、定时开盘、回购)组合合约源代码下载:

Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】

pdf+视频Coinbase base发币教程及多模式组合合约源代码下载地址:

此处为隐藏的内容!
登录后才能查看!

添加VX或者telegram获取全程线上免费指导

Coinbase base链发币教程——remix+metamask实现BASE链上发币【pdf+视频BASE发币教程下载】
免责声明

免责声明:

本文不代表知点网立场,且不构成投资建议,请谨慎对待。用户由此造成的损失由用户自行承担,与知点网没有任何关系;

知点网不对网站所发布内容的准确性,真实性等任何方面做任何形式的承诺和保障;

网站内所有涉及到的区块链(衍生)项目,知点网对项目的真实性,准确性等任何方面均不做任何形式的承诺和保障;

网站内所有涉及到的区块链(衍生)项目,知点网不对其构成任何投资建议,用户由此造成的损失由用户自行承担,与知点网没有任何关系;

知点区块链研究院声明:知点区块链研究院内容由知点网发布,部分来源于互联网和行业分析师投稿收录,内容为知点区块链研究院加盟专职分析师独立观点,不代表知点网立场。

本文是全系列中第217 / 238篇:通证发行

  • 我的微信
  • 这是我的微信扫一扫
  • weinxin
  • 我的电报
  • 这是我的电报扫一扫
  • weinxin
chatGPT账号
知点

发表评论

您必须登录才能发表评论!